Clipper GC55 Early Entry Small Push Walk-Behind Saw – Gas

NOTE: BLADE ON SAWS IN PICTURE ARE NOT INCLUDED : BLADES MUST BE PURCHASED SEPARATELY

SHIPS WITHIN 24 HOURS – IN STOCK!

*VACUUM ATTACHMENT NOT INCLUDED ON THIS MACHINE

With a compact, lightweight design backed by the reliable Honda 5HP gasoline engine, the GC55 early entry saw is intended for a variety of applications. From green, cured or decorative concrete cutting to expansion joints, the features of this small push saw are hard to beat in a single saw. The low, wide profile of the frame, along with the front mount blade, contributes to producing a more disciplined cut.

• Power Source: Gas
• Engine Power: 5.5
• Motor / Engine Type: Honda
• Propelling: Push
• Max Blade Diameter: 10 In.
• Max Cutting Depth: 4 In.
• Arbor Hole: 5/8 In.
• Blade Flange Diameter: 3 In.
• Rotation Speed: 3000
• Side of Cut: Center
• Starter: Manual

Clipper GC55 Early Entry Small Push Walk‑Behind Saw – The Compact Powerhouse for Green and Cured Concrete

When you’re working with green, decorative, or cured concrete, having a compact, reliable, and precise walk-behind saw is essential. The Clipper GC55 Early Entry Small Push Walk‑Behind Saw delivers just that—combining a rugged build, user-friendly features, and powerful cutting capability. Built around a 5.5 HP Honda GX160 engine, this saw is perfect for jointing, trenching, and decorative cuts with up to 4″ cutting depth, making it a top choice for contractors and rental fleets in 2025 

🔧 Key Features & Benefits

1. Compact, Durable Design

The GC55 features a low-profile steel frame, reinforced with structural supports for durability and stability. Weighing around 115 lb and with a fold-down handle, it’s easy to store and maneuver .

2. Honda GX160 5.5 HP Engine

Known for its reliability and torque, the GX160 ensures consistent cutting performance and less downtime. It supports a wide range of concrete tasks, from decorative cuts to expansion joints 

3. Upfront Blade Mount

This design places weight directly above the blade, helping maintain cut accuracy and reducing blade wander—ideal for disciplined early-entry work 

4. 10″ Blade Capacity with 4″ Depth

Using widely available 10″ blades, this saw achieves up to 4″ depth, making it versatile for trenches, scores, and early entry control joints 

5. Fold‑Down Frame

The GC55’s foldable design enables compact storage and easy transport in trailers or trucks—perfect for jobsite mobility 

6. Stable Wheel Design

The saw’s front and rear wheels, designed to roll over debris, maintain cut alignment and stability on jobsite surfaces 

🎥 See It in Action

🛠️ Technical Specifications

• Engine: Honda GX160, 5.5 HP (4.8 HP net) 

• Blade: 10″ diameter, 5/8″ arbor, 3″ flange 

• Max Cut Depth: 4″ (95 mm) 

• Blade RPM: 3,000 RPM

• Weight: ~115 lb (uncrated) 

• Dimensions: Transport 32″ L, Working ~43″ L; Width 18″; Height ~24″ 

• Starter: Manual recoil

• Cooling: Forced-air; Air filter is 4-stage cyclone 

💡 Ideal Applications

• Early-entry green concrete cuts to prevent spalling and cracking

• Decorative scores in finished surfaces

• Expansion or contraction joints up to 4″ deep

• Trenching for utilities or lay-in conduits

• Repair cutting on sidewalks, patios, and other slabs

✅ Operator Advantages

Precision & Stability

Front blade design and disciplined frame control reduce blade wander and ensure straight cuts 

Jobsite Mobility

Lightweight and portable, yet durable enough for daily commercial use.

Durable Engine Performance

The GX160 features cyclone filtration and dependable ignition for consistent runtime.

Clean Setup

Ideal for decorative or polished floors; minimal dust and aggressive cutting provide clean edges.

🛠️ Maintenance Tips

1. Clean after use—remove slurry and debris.

2. Lubricate wheel axles, especially after initial runs 

3. Replace blade at first signs of wear for accuracy.

4. Maintain 4-stage air filter to preserve engine life.

5. Inspect frame joints and folding mechanism regularly.

🗣️ Contractor Feedback

“Best saw I’ve owned. Paid for itself in one job…easy to operate” — Eric W. W. 
“Wheels got stiff—lubed, now cuts straight as an arrow” — Mark 

🔚 Final Verdict

The Clipper GC55 combines portability, precision, and power in a package that’s hard to beat. Whether you’re cutting green concrete or decorative joints, its compact build and disciplined design reduce operator effort and improve outcomes. Thanks to reliable engine performance, easy transport, and thoughtful engineering, it’s an ideal addition to rental fleets, concrete contractors, and hardscape professionals looking for a clean, efficient cutting solution in 2025.